import _plotly_utils.basevalidators


class BoxValidator(_plotly_utils.basevalidators.CompoundValidator):
    def __init__(self, plotly_name="box", parent_name="", **kwargs):
        super(BoxValidator, self).__init__(
            plotly_name=plotly_name,
            parent_name=parent_name,
            data_class_str=kwargs.pop("data_class_str", "Box"),
            data_docs=kwargs.pop(
                "data_docs",
                """
            alignmentgroup
                Set several traces linked to the same position
                axis or matching axes to the same
                alignmentgroup. This controls whether bars
                compute their positional range dependently or
                independently.
            boxmean
                If True, the mean of the box(es)' underlying
                distribution is drawn as a dashed line inside
                the box(es). If "sd" the standard deviation is
                also drawn. Defaults to True when `mean` is
                set. Defaults to "sd" when `sd` is set
                Otherwise defaults to False.
            boxpoints
                If "outliers", only the sample points lying
                outside the whiskers are shown If
                "suspectedoutliers", the outlier points are
                shown and points either less than 4*Q1-3*Q3 or
                greater than 4*Q3-3*Q1 are highlighted (see
                `outliercolor`) If "all", all sample points are
                shown If False, only the box(es) are shown with
                no sample points Defaults to
                "suspectedoutliers" when `marker.outliercolor`
                or `marker.line.outliercolor` is set. Defaults
                to "all" under the q1/median/q3 signature.
                Otherwise defaults to "outliers".
            customdata
                Assigns extra data each datum. This may be
                useful when listening to hover, click and
                selection events. Note that, "scatter" traces
                also appends customdata items in the markers
                DOM elements
            customdatasrc
                Sets the source reference on Chart Studio Cloud
                for `customdata`.
            dx
                Sets the x coordinate step for multi-box traces
                set using q1/median/q3.
            dy
                Sets the y coordinate step for multi-box traces
                set using q1/median/q3.
            fillcolor
                Sets the fill color. Defaults to a half-
                transparent variant of the line color, marker
                color, or marker line color, whichever is
                available.
            hoverinfo
                Determines which trace information appear on
                hover. If `none` or `skip` are set, no
                information is displayed upon hovering. But, if
                `none` is set, click and hover events are still
                fired.
            hoverinfosrc
                Sets the source reference on Chart Studio Cloud
                for `hoverinfo`.
            hoverlabel
                :class:`plotly.graph_objects.box.Hoverlabel`
                instance or dict with compatible properties
            hoveron
                Do the hover effects highlight individual boxes
                or sample points or both?
            hovertemplate
                Template string used for rendering the
                information that appear on hover box. Note that
                this will override `hoverinfo`. Variables are
                inserted using %{variable}, for example "y:
                %{y}" as well as %{xother}, {%_xother},
                {%_xother_}, {%xother_}. When showing info for
                several points, "xother" will be added to those
                with different x positions from the first
                point. An underscore before or after
                "(x|y)other" will add a space on that side,
                only when this field is shown. Numbers are
                formatted using d3-format's syntax
                %{variable:d3-format}, for example "Price:
                %{y:$.2f}". https://github.com/d3/d3-format/tre
                e/v1.4.5#d3-format for details on the
                formatting syntax. Dates are formatted using
                d3-time-format's syntax %{variable|d3-time-
                format}, for example "Day: %{2019-01-01|%A}".
                https://github.com/d3/d3-time-
                format/tree/v2.2.3#locale_format for details on
                the date formatting syntax. The variables
                available in `hovertemplate` are the ones
                emitted as event data described at this link
                https://plotly.com/javascript/plotlyjs-
                events/#event-data. Additionally, every
                attributes that can be specified per-point (the
                ones that are `arrayOk: true`) are available.
                Anything contained in tag `<extra>` is
                displayed in the secondary box, for example
                "<extra>{fullData.name}</extra>". To hide the
                secondary box completely, use an empty tag
                `<extra></extra>`.
            hovertemplatesrc
                Sets the source reference on Chart Studio Cloud
                for `hovertemplate`.
            hovertext
                Same as `text`.
            hovertextsrc
                Sets the source reference on Chart Studio Cloud
                for `hovertext`.
            ids
                Assigns id labels to each datum. These ids for
                object constancy of data points during
                animation. Should be an array of strings, not
                numbers or any other type.
            idssrc
                Sets the source reference on Chart Studio Cloud
                for `ids`.
            jitter
                Sets the amount of jitter in the sample points
                drawn. If 0, the sample points align along the
                distribution axis. If 1, the sample points are
                drawn in a random jitter of width equal to the
                width of the box(es).
            legendgroup
                Sets the legend group for this trace. Traces
                part of the same legend group hide/show at the
                same time when toggling legend items.
            legendgrouptitle
                :class:`plotly.graph_objects.box.Legendgrouptit
                le` instance or dict with compatible properties
            legendrank
                Sets the legend rank for this trace. Items and
                groups with smaller ranks are presented on
                top/left side while with `*reversed*
                `legend.traceorder` they are on bottom/right
                side. The default legendrank is 1000, so that
                you can use ranks less than 1000 to place
                certain items before all unranked items, and
                ranks greater than 1000 to go after all
                unranked items.
            line
                :class:`plotly.graph_objects.box.Line` instance
                or dict with compatible properties
            lowerfence
                Sets the lower fence values. There should be as
                many items as the number of boxes desired. This
                attribute has effect only under the
                q1/median/q3 signature. If `lowerfence` is not
                provided but a sample (in `y` or `x`) is set,
                we compute the lower as the last sample point
                below 1.5 times the IQR.
            lowerfencesrc
                Sets the source reference on Chart Studio Cloud
                for `lowerfence`.
            marker
                :class:`plotly.graph_objects.box.Marker`
                instance or dict with compatible properties
            mean
                Sets the mean values. There should be as many
                items as the number of boxes desired. This
                attribute has effect only under the
                q1/median/q3 signature. If `mean` is not
                provided but a sample (in `y` or `x`) is set,
                we compute the mean for each box using the
                sample values.
            meansrc
                Sets the source reference on Chart Studio Cloud
                for `mean`.
            median
                Sets the median values. There should be as many
                items as the number of boxes desired.
            mediansrc
                Sets the source reference on Chart Studio Cloud
                for `median`.
            meta
                Assigns extra meta information associated with
                this trace that can be used in various text
                attributes. Attributes such as trace `name`,
                graph, axis and colorbar `title.text`,
                annotation `text` `rangeselector`,
                `updatemenues` and `sliders` `label` text all
                support `meta`. To access the trace `meta`
                values in an attribute in the same trace,
                simply use `%{meta[i]}` where `i` is the index
                or key of the `meta` item in question. To
                access trace `meta` in layout attributes, use
                `%{data[n[.meta[i]}` where `i` is the index or
                key of the `meta` and `n` is the trace index.
            metasrc
                Sets the source reference on Chart Studio Cloud
                for `meta`.
            name
                Sets the trace name. The trace name appear as
                the legend item and on hover. For box traces,
                the name will also be used for the position
                coordinate, if `x` and `x0` (`y` and `y0` if
                horizontal) are missing and the position axis
                is categorical
            notched
                Determines whether or not notches are drawn.
                Notches displays a confidence interval around
                the median. We compute the confidence interval
                as median +/- 1.57 * IQR / sqrt(N), where IQR
                is the interquartile range and N is the sample
                size. If two boxes' notches do not overlap
                there is 95% confidence their medians differ.
                See https://sites.google.com/site/davidsstatist
                ics/home/notched-box-plots for more info.
                Defaults to False unless `notchwidth` or
                `notchspan` is set.
            notchspan
                Sets the notch span from the boxes' `median`
                values. There should be as many items as the
                number of boxes desired. This attribute has
                effect only under the q1/median/q3 signature.
                If `notchspan` is not provided but a sample (in
                `y` or `x`) is set, we compute it as 1.57 * IQR
                / sqrt(N), where N is the sample size.
            notchspansrc
                Sets the source reference on Chart Studio Cloud
                for `notchspan`.
            notchwidth
                Sets the width of the notches relative to the
                box' width. For example, with 0, the notches
                are as wide as the box(es).
            offsetgroup
                Set several traces linked to the same position
                axis or matching axes to the same offsetgroup
                where bars of the same position coordinate will
                line up.
            opacity
                Sets the opacity of the trace.
            orientation
                Sets the orientation of the box(es). If "v"
                ("h"), the distribution is visualized along the
                vertical (horizontal).
            pointpos
                Sets the position of the sample points in
                relation to the box(es). If 0, the sample
                points are places over the center of the
                box(es). Positive (negative) values correspond
                to positions to the right (left) for vertical
                boxes and above (below) for horizontal boxes
            q1
                Sets the Quartile 1 values. There should be as
                many items as the number of boxes desired.
            q1src
                Sets the source reference on Chart Studio Cloud
                for `q1`.
            q3
                Sets the Quartile 3 values. There should be as
                many items as the number of boxes desired.
            q3src
                Sets the source reference on Chart Studio Cloud
                for `q3`.
            quartilemethod
                Sets the method used to compute the sample's Q1
                and Q3 quartiles. The "linear" method uses the
                25th percentile for Q1 and 75th percentile for
                Q3 as computed using method #10 (listed on http
                ://www.amstat.org/publications/jse/v14n3/langfo
                rd.html). The "exclusive" method uses the
                median to divide the ordered dataset into two
                halves if the sample is odd, it does not
                include the median in either half - Q1 is then
                the median of the lower half and Q3 the median
                of the upper half. The "inclusive" method also
                uses the median to divide the ordered dataset
                into two halves but if the sample is odd, it
                includes the median in both halves - Q1 is then
                the median of the lower half and Q3 the median
                of the upper half.
            sd
                Sets the standard deviation values. There
                should be as many items as the number of boxes
                desired. This attribute has effect only under
                the q1/median/q3 signature. If `sd` is not
                provided but a sample (in `y` or `x`) is set,
                we compute the standard deviation for each box
                using the sample values.
            sdsrc
                Sets the source reference on Chart Studio Cloud
                for `sd`.
            selected
                :class:`plotly.graph_objects.box.Selected`
                instance or dict with compatible properties
            selectedpoints
                Array containing integer indices of selected
                points. Has an effect only for traces that
                support selections. Note that an empty array
                means an empty selection where the `unselected`
                are turned on for all points, whereas, any
                other non-array values means no selection all
                where the `selected` and `unselected` styles
                have no effect.
            showlegend
                Determines whether or not an item corresponding
                to this trace is shown in the legend.
            stream
                :class:`plotly.graph_objects.box.Stream`
                instance or dict with compatible properties
            text
                Sets the text elements associated with each
                sample value. If a single string, the same
                string appears over all the data points. If an
                array of string, the items are mapped in order
                to the this trace's (x,y) coordinates. To be
                seen, trace `hoverinfo` must contain a "text"
                flag.
            textsrc
                Sets the source reference on Chart Studio Cloud
                for `text`.
            uid
                Assign an id to this trace, Use this to provide
                object constancy between traces during
                animations and transitions.
            uirevision
                Controls persistence of some user-driven
                changes to the trace: `constraintrange` in
                `parcoords` traces, as well as some `editable:
                true` modifications such as `name` and
                `colorbar.title`. Defaults to
                `layout.uirevision`. Note that other user-
                driven trace attribute changes are controlled
                by `layout` attributes: `trace.visible` is
                controlled by `layout.legend.uirevision`,
                `selectedpoints` is controlled by
                `layout.selectionrevision`, and
                `colorbar.(x|y)` (accessible with `config:
                {editable: true}`) is controlled by
                `layout.editrevision`. Trace changes are
                tracked by `uid`, which only falls back on
                trace index if no `uid` is provided. So if your
                app can add/remove traces before the end of the
                `data` array, such that the same trace has a
                different index, you can still preserve user-
                driven changes if you give each trace a `uid`
                that stays with it as it moves.
            unselected
                :class:`plotly.graph_objects.box.Unselected`
                instance or dict with compatible properties
            upperfence
                Sets the upper fence values. There should be as
                many items as the number of boxes desired. This
                attribute has effect only under the
                q1/median/q3 signature. If `upperfence` is not
                provided but a sample (in `y` or `x`) is set,
                we compute the lower as the last sample point
                above 1.5 times the IQR.
            upperfencesrc
                Sets the source reference on Chart Studio Cloud
                for `upperfence`.
            visible
                Determines whether or not this trace is
                visible. If "legendonly", the trace is not
                drawn, but can appear as a legend item
                (provided that the legend itself is visible).
            whiskerwidth
                Sets the width of the whiskers relative to the
                box' width. For example, with 1, the whiskers
                are as wide as the box(es).
            width
                Sets the width of the box in data coordinate If
                0 (default value) the width is automatically
                selected based on the positions of other box
                traces in the same subplot.
            x
                Sets the x sample data or coordinates. See
                overview for more info.
            x0
                Sets the x coordinate for single-box traces or
                the starting coordinate for multi-box traces
                set using q1/median/q3. See overview for more
                info.
            xaxis
                Sets a reference between this trace's x
                coordinates and a 2D cartesian x axis. If "x"
                (the default value), the x coordinates refer to
                `layout.xaxis`. If "x2", the x coordinates
                refer to `layout.xaxis2`, and so on.
            xcalendar
                Sets the calendar system to use with `x` date
                data.
            xhoverformat
                Sets the hover text formatting rulefor `x`
                using d3 formatting mini-languages which are
                very similar to those in Python. For numbers,
                see: https://github.com/d3/d3-format/tree/v1.4.
                5#d3-format. And for dates see:
                https://github.com/d3/d3-time-
                format/tree/v2.2.3#locale_format. We add two
                items to d3's date formatter: "%h" for half of
                the year as a decimal number as well as "%{n}f"
                for fractional seconds with n digits. For
                example, *2016-10-13 09:15:23.456* with
                tickformat "%H~%M~%S.%2f" would display
                *09~15~23.46*By default the values are
                formatted using `xaxis.hoverformat`.
            xperiod
                Only relevant when the axis `type` is "date".
                Sets the period positioning in milliseconds or
                "M<n>" on the x axis. Special values in the
                form of "M<n>" could be used to declare the
                number of months. In this case `n` must be a
                positive integer.
            xperiod0
                Only relevant when the axis `type` is "date".
                Sets the base for period positioning in
                milliseconds or date string on the x0 axis.
                When `x0period` is round number of weeks, the
                `x0period0` by default would be on a Sunday
                i.e. 2000-01-02, otherwise it would be at
                2000-01-01.
            xperiodalignment
                Only relevant when the axis `type` is "date".
                Sets the alignment of data points on the x
                axis.
            xsrc
                Sets the source reference on Chart Studio Cloud
                for `x`.
            y
                Sets the y sample data or coordinates. See
                overview for more info.
            y0
                Sets the y coordinate for single-box traces or
                the starting coordinate for multi-box traces
                set using q1/median/q3. See overview for more
                info.
            yaxis
                Sets a reference between this trace's y
                coordinates and a 2D cartesian y axis. If "y"
                (the default value), the y coordinates refer to
                `layout.yaxis`. If "y2", the y coordinates
                refer to `layout.yaxis2`, and so on.
            ycalendar
                Sets the calendar system to use with `y` date
                data.
            yhoverformat
                Sets the hover text formatting rulefor `y`
                using d3 formatting mini-languages which are
                very similar to those in Python. For numbers,
                see: https://github.com/d3/d3-format/tree/v1.4.
                5#d3-format. And for dates see:
                https://github.com/d3/d3-time-
                format/tree/v2.2.3#locale_format. We add two
                items to d3's date formatter: "%h" for half of
                the year as a decimal number as well as "%{n}f"
                for fractional seconds with n digits. For
                example, *2016-10-13 09:15:23.456* with
                tickformat "%H~%M~%S.%2f" would display
                *09~15~23.46*By default the values are
                formatted using `yaxis.hoverformat`.
            yperiod
                Only relevant when the axis `type` is "date".
                Sets the period positioning in milliseconds or
                "M<n>" on the y axis. Special values in the
                form of "M<n>" could be used to declare the
                number of months. In this case `n` must be a
                positive integer.
            yperiod0
                Only relevant when the axis `type` is "date".
                Sets the base for period positioning in
                milliseconds or date string on the y0 axis.
                When `y0period` is round number of weeks, the
                `y0period0` by default would be on a Sunday
                i.e. 2000-01-02, otherwise it would be at
                2000-01-01.
            yperiodalignment
                Only relevant when the axis `type` is "date".
                Sets the alignment of data points on the y
                axis.
            ysrc
                Sets the source reference on Chart Studio Cloud
                for `y`.
""",
            ),
            **kwargs,
        )
